Main Discussion Area > English Warbow
war arrow build
Loki:
You could try Hector Cole adb.
Ian.:
I get them from Richard Head, she sells a 'type 10' 3/8 and a 1/2 Tudors. They are both good and very cheap, the Tudors can be a little heavy but you can grind them a little to get them close to a forged weight. I have been using them for years and they are well worth the money.
adb:
--- Quote from: Loki on November 30, 2011, 05:24:53 am ---You could try Hector Cole adb.
--- End quote ---
I have bought heads from Hector Cole. Only problem is, they're bloody expensive by the time they cross the pond and after I pay exchange. They are works of art, however.
bow-toxo:
--- Quote from: mikekeswick on November 27, 2011, 04:58:54 am ---Be careful with grain run-offs on shafts
--- End quote ---
Grain run offs are bad news, first because of potential breakage, and second because if grain is not straight, the shaft will warp easily. It is best to have a selection of shafts and reject any and all with grain run-off.
Loki:
--- Quote ---I have bought heads from Hector Cole. Only problem is, they're bloody expensive by the time they cross the pond and after I pay exchange. They are works of art, however
--- End quote ---
They are expensive on this side of the pond too,but like you say he's very good at it.
You could try John Marshall?
http://www.youtube.com/watch?v=7eXBdDlisak
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version