Main Discussion Area > Shooting and Hunting
Shot for two hours today
Nidhoggr:
I shot at an archery range for about 2 hours today. An hour on a 10 yard target and an hour on a 20 yard target. While i could place on the target 9 times out of 10, I wasn't able to consistently group them. I assume this comes with practice.
An issue I was having was with the bow hand (left hand) I had to extend an index finger to make a U shape to rest the arrow on. When i tried to rest it just on a knuckle, the arrow slid around. Any tips?
I also realized that my stance was goofy at first. I looked into that and remedied it. Improved my shots a LOT.
The bow is 50# @ 28". Arrows are 31".
youngbowyer:
I had problems with grouping at first, make sure you have a consistent anchor point and release. other than that, just keep practicing.
Pat B:
You are probably gripping the string while drawing. This will cause the arrow to slide off the rest(bow shelf, hand). Use your fingers like a hookand pull straight back without gripping.
Start at 10 yards and shoot until you feel confident at that range. Then step back a few stepd and shoot more until you get confident then move back, etc,etc. Occasionally go back to 10 yards and try that again.
Also, pick a spot!!! Don't shoot at the target, find a small spot on the target and concentrate on hitting that spot.
In traditional archery consistancy is crutial like Youngbowyer said.
bowsandroses:
Well these guys have given almost all the good advise a person can give. But I wan't to add to Pat's string gripping that is the most common problem but I've noticed with my kids and a few friends that they would try to hold the string at the second nuckle when I got them to hold it at the first nuckle closer to the finger tips problem cured. Also I know from my own experience from back when I lost my pin sights and train'n wheels shooting with both eyes open created consistancy.
Nidhoggr:
there's technically no arrow rest. The bow has a hemp wrap handle and that's it. I'll play around with it hopefully friday when i go back to the range.
Thanks for all the advice thus far!
Navigation
[0] Message Index
[#] Next page
Go to full version