Main Discussion Area > HowTo's and Build-a-longs

Glues and Adhesives

(1/2) > >>

bow101:
Has anyone had any success using Titebond 3 for building laminated bows.......and is it recommmend by any Experienced builders on Primitive Archer..?
I cannot seem to find URAC-185 but have found the marine Variety and also a contact type of  cement which is guarenteed against creep and is usefull for gluing various materials together like, plastic to wood, steel to wood, fiberglass to wood.etc....etc......comes in oil and water base form.

Justin Snyder:
Tons of guys are using Titebond for laminated bows. It is probably the most recommended glue. The only thing it is not recommended for is replacing hide glue with sinew back or horn bellies.

Might I suggest the search option in the future. Search for Titebond and you will find tons of recommendations and tips.

bow101:
Justin,

I did a search on Titebond and basically came up empty.............:(

CraigMBeckett:

--- Quote from: bow101 on January 18, 2012, 12:52:22 am ---Justin,

I did a search on Titebond and basically came up empty.............:(

--- End quote ---

Try TB, TB3, TB2 etc.

Craig.

bow101:
Thank you I will try that..

Navigation

[0] Message Index

[#] Next page