Main Discussion Area > Bows

Delaminated handle

(1/1)

Kev K.:
ive been working on a 64" osage/boo laminate.  The handle is about 10" including the fades.  When i went to draw the bow for the first time the handle became delaminated.  I am gonna guess that there is to much bend in the handle.  I was using Loc Tite quick set epoxy to glue the handle.  Would a different epoxy such as Urac or Smooth On prevent this problem??? ???

Marc St Louis:
The best fix for that is a thin lam, about 1/8" thick, between the handle and core that extends past the handle by at least 1". Gradually thin the lam out from the handle out.

Kev K.:
Thanks marc ill give that a try ;D

Navigation

[0] Message Index