Author Topic: Finally, Corner Notches  (Read 3250 times)

0 Members and 1 Guest are viewing this topic.

Offline Will H

  • Member
  • Posts: 2,120
Re: Finally, Corner Notches
« Reply #15 on: February 19, 2012, 01:28:24 pm »
I got mine from flintknappingtools Its the double ended 3/4" version. Well worth the money!
Proud Member of Twin Oaks Bowhunters
           Clarksville, Tennessee

   "Middle Tennessee is the place to be"

Offline gstoneberg

  • Member
  • Posts: 3,889
Re: Finally, Corner Notches
« Reply #16 on: February 19, 2012, 05:15:00 pm »
I went and ordered one of those 3/4" flexible ishi sticks.  Thanks.

George
St Paul, TX

Offline Will H

  • Member
  • Posts: 2,120
Re: Finally, Corner Notches
« Reply #17 on: February 19, 2012, 05:42:22 pm »
No problem George, the other thing Jesse showed me (and It made ALL the difference!) is wrap the end with a piece of bicycle intertube. To really get all the flex you can out of it you have to really press HARD and the intertube helps from slipping.  ;)  I also got one of those 3/4" rubber hand pads but had to cut a larger slot for the WAY larger flakes I was able to create with this technique. The trick is not to choke up to much on the grip. Place you hand a little farther back. I took a couple pics to better demonstrate. obviosly youll be holding the preform but I put it against my leg so I could take the pic. Hope this helps.
Proud Member of Twin Oaks Bowhunters
           Clarksville, Tennessee

   "Middle Tennessee is the place to be"

Offline Will H

  • Member
  • Posts: 2,120
Re: Finally, Corner Notches
« Reply #18 on: February 19, 2012, 05:43:43 pm »
Oh! And if you aint huffin an puffin and breakin a sweat you aint doin it right  ;)
Proud Member of Twin Oaks Bowhunters
           Clarksville, Tennessee

   "Middle Tennessee is the place to be"

Offline gstoneberg

  • Member
  • Posts: 3,889
Re: Finally, Corner Notches
« Reply #19 on: February 19, 2012, 05:55:29 pm »
Oh! And if you aint huffin an puffin and breakin a sweat you aint doin it right  ;)

Believe me Will, that's the only part of this I am succeeding at. ;D ;D ;D ;D
St Paul, TX

Offline Will H

  • Member
  • Posts: 2,120
Re: Finally, Corner Notches
« Reply #20 on: February 19, 2012, 06:04:03 pm »
 :laugh:  LOL  :laugh:
Proud Member of Twin Oaks Bowhunters
           Clarksville, Tennessee

   "Middle Tennessee is the place to be"

Offline Gus

  • Member
  • Posts: 1,829
  • It's Time To Make Some Shavings!
Re: Finally, Corner Notches
« Reply #21 on: February 20, 2012, 06:23:59 pm »
Thank You for the Tip Will H.
I ordered one this morning.
Look forward to givin'er a try...

:)

-gus
"I taught him archery everyday, and when he got good at it he throw an arrow at me."

Conroe, TX

Offline gstoneberg

  • Member
  • Posts: 3,889
Re: Finally, Corner Notches
« Reply #22 on: February 20, 2012, 06:50:06 pm »
I ordered mine too, should ship tomorrow.

George
St Paul, TX

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,889
  • Eddie Parker
Re: Finally, Corner Notches
« Reply #23 on: February 20, 2012, 10:18:39 pm »
Wow, George, you're improving with every point. I love 'em.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline gstoneberg

  • Member
  • Posts: 3,889
Re: Finally, Corner Notches
« Reply #24 on: February 20, 2012, 10:35:20 pm »
Thanks Eddie, but when you start waaay at the bottom things look up for a looong time. :)

George
St Paul, TX