my arrow wrenchs/ raw shafts and finished arrows

[half eye]

Thought I'd post my arrow wrenchs. The closed one is for straightening raw shafts, and the open one is for "adjusting" finished arrows (with heads and fletch). Nothin special, but it's another use for antler tines, maybe give some ideas.

Oh ya the way they are used is to anchor the tool with one hand on yer knee (sitting) and run the shaft with the other hand, thats why they got a small curve to 'em. The closed tool I also use to burnish and as a size gauge for my split hardwood shafts.
rich

[bubby]

those look good rich, better than the screw driver i use, Bub

[Gun Doc]

Cool!  Those are a lot nicer than mine.  Josh

[half eye]

I generally just use my hands anymore....but every now and then? Doc, them ought to look real familiar to ya , Bubby whatever you use I'll bet the arrows speak for themselves.
rich

[Gun Doc]

Glad you're gettin some use out of them antlers Rich.  Josh

[PrimitiveSkills]

How do you get the holes in them?

-PrimitiveSkills

[half eye]

PS, I usually "bore" mine with a pocket knife, that I ground into a "dagger" shape. The core in the middle of antler is soft enough to carve pretty easy with a knife......if it's easier just use a drill and bit.
rich

[okiecountryboy]

Just caught this Rich. Those look a hell of a lot easier to use than the rocks that I use.
Gave me some new ideas...As you usually do...

[bowtarist]

  like em, thanks for the idea. dp