Author Topic: Oak for staves, bark question....  (Read 1421 times)

0 Members and 1 Guest are viewing this topic.

TurtleCreek

  • Guest
Oak for staves, bark question....
« on: April 24, 2012, 02:35:44 pm »
   I will be heading out again to make another stave haul and was wondering if oak bark will "peel" off like it does on hickory or hackberry?

Offline Dauntless

  • Member
  • Posts: 282
Re: Oak for staves, bark question....
« Reply #1 on: April 24, 2012, 05:17:34 pm »
The red oak I cut in the summer peeled just fine when fresh.
The starving grad student with too many hobbies.

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Oak for staves, bark question....
« Reply #2 on: April 24, 2012, 09:39:23 pm »
Yes. Jawge
Set Happens!
If you ain't breakin' you ain't makin!

Offline JW_Halverson

  • Member
  • Posts: 11,875
Re: Oak for staves, bark question....
« Reply #3 on: April 25, 2012, 11:20:54 pm »
And if you have a mind to make some dye for fabric in the brown/grey color range, save some of that bark.  Fill a pot with all she will hold, top with low mineral content water and let 'er set a few days.  Then boil it for a good long time, strain out the chunks when it is down to about 25% of the starting volume. 

Makes a really good dye for cotton/linen fabrics.  The dye does not flouresce in UV light and it blends with any background when deer look at it.  Many modern dyes, including those used in camo, have UV enhancers to look better to our eyes.  To deer they look like lit up strip joint signs!
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.