Main Discussion Area > Flintknapping
Point of The Month - Sticky
leapingbare:
Nice fat flute channel bob. ;)
Outbackbob48:
2nd attempt, got a rough flute on each side but still pretty rough example of a Folsom, When you start at the bottom of the barrel there is only one way out , look up I can only get better ;D Bob
leapingbare:
Bob you did it!
If that was to come out of the ground there no doubt it would be called a folsom.
Good job bro!
Outbackbob48:
Thanks Jesse coming from you means an awful lot to me, ya if i found that in a cornfield I would probably crap myself , but you know how the perfectionist stuff works in us, I can do better. thanks for all your help with this one I needed it. One more question if you don't mind, I had a short flute an tryed to re flute an got a reverse flute run from point to end of short flute. I thought that was odd and lucky . Bob
leapingbare:
--- Quote from: Outbackbob48 on August 12, 2013, 04:38:11 pm ---Thanks Jesse coming from you means an awful lot to me, ya if i found that in a cornfield I would probably crap myself , but you know how the perfectionist stuff works in us, I can do better. thanks for all your help with this one I needed it. One more question if you don't mind, I had a short flute an tryed to re flute an got a reverse flute run from point to end of short flute. I thought that was odd and lucky . Bob
--- End quote ---
Want to avid those reverse flutes.. they will usually roll off to one side and take the edge off. I will abrade the tip of the point well before fluting and keep it sorta wide to avid those random tip to base flutes ;)
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version