Main Discussion Area > HowTo's and Build-a-longs

Badger skin quiver

<< < (2/2)

TRACY:
I made this quiver in December 07 after being inspired by Steve Sell's article "How to create a badger skin back quiver"  in the April/May issue(volume 15 issue 2 as stated by Calendargirl). I followed the basic instructions and in the end I added my own stuff to set it apart. The tube I made was actually smaller than the large tanned badger and so I opted for a hide that was a little smaller and better fit. I will use the same plans again but make the tube a little larger as Steve mentioned in this very easy to follow article.

Thanks Tracy

[attachment deleted by admin]

Staver:
I posted one that I made just recently:

http://www.primitivearcher.com/smf/index.php/topic,6516.0.html

I got the idea to make the badger quiver from the April/May 2007 issue of PA.  Steve Sell had an excellent article on how to make one, so I got the materials and dove in!  Hope this helps (sorry a little late :-[)

Joe H

Navigation

[0] Message Index

[*] Previous page