Main Discussion Area > HowTo's and Build-a-longs

bow forms

(1/1)

kurogane_84:
Hey all, im looking for some pics of bow forms for reflex deflex, making laminated bows and i cant find any good ones, and i really do not know how to make the laminated bow forms, any advice??

Pat B:
You can get blueprints from Bingham Products. A lot will depend of the amount of reflex and deflex and the length of the bow.

Flatlander:
i used a leaf spring  ,centered everything up   traced it  on to nice straight 2x6   ,cut with band saw   one inch  clamp holes      also you could look at   poor folks bow building ;)

kurogane_84:

--- Quote from: Flatlander on July 15, 2012, 04:06:25 pm ---i used a leaf spring  ,centered everything up   traced it  on to nice straight 2x6   ,cut with band saw   one inch  clamp holes      also you could look at   poor folks bow building ;)

--- End quote ---

HAHAHHA never thought of a leaf spring, when i worked on trucks they launched out of the tabs, and i had the weight taken off of them LOL

and ill look at poor folks bow building

Navigation

[0] Message Index