Information and Resources > Trading Post

Old Saw Blades?

(1/1)

Dictionary:
Sounds like some of you guys go through a lot of bandsaw,skillsaw, whatever saw blades. I was looking at harborfreight for a blade with a thickness of .040 but couldnt find anything of that size. Was wondering if someone here might work out a deal with me so i can get my hands on some to attempt to make trade points with. I wanted .040 because i was told its easier to work with using a hacksaw,file,and maybe a chisel and hammer.

paulsemp:
I have a lot of OLD 7 1/4 skill saw blades. Before carbide teeth ( good steel). I can cut out blanks for you if you do not have the tools. Let me know

Dictionary:
Paul what does the 7 1/4 refer to? The diameter in inches of the blade im guessing? I'm just trying to find something within workable thickness.

And also i'd like to see if i can make them myself with simple hand tools. If i can't i can revert to my dremel tool if possible.

Thanks

seider:
We go through a lot of band saw blades I can check the thickness if you want me to and get back with you.

rileyconcrete:
I have used concrete saw blades.  10 inch diameter.  will check the thickness if you are interested.

Tell

Navigation

[0] Message Index