Main Discussion Area > English Warbow
Horn nock inserts
adb:
--- Quote from: kevinsmith5 on January 07, 2013, 12:47:47 am ---I'm assuming you could also do this with hard wood insert. Something like Ipe or cocobolo?
--- End quote ---
Yes, no problem. I've done it with padauk, purpleheart, cocbolo, ebony and bloodwood. Works great, looks good, and is easier than horn.
The green & white arrows have purpleheart inserts, and the red & black have cocobolo.
I normally cut my inserts 1.5" deep on arrows for target weight bows, and the standard 2" deep for warbow weight. The difference in weight between the insert material and the wood you remove to insert it is negligible. No balance issues. It's much less than the weight of a plastic nock.
CraigMBeckett:
--- Quote from: WillS on January 07, 2013, 02:43:35 pm ---I was flicking through Pip Bickerstaffe's "The heritage of the longbow" recently and he outlined a horn nock insert that was wedge shaped, the wide end of the wedge at the nock end, tapering to a point 2 inches long. Apparently that was far more traditional, but I've not seen it mentioned anywhere else.
--- End quote ---
Be careful of quoting Pip he a lot of things he says are questionable. However the term traditional is that applied to Georgan / Victorian target ELBs not medieval style warbows and arrows. As with everything else to do with War Bows we only have limited information (generally documentary) to go on and wedge shaped reinforcing is not mentioned. While that does not mean it did not exist but only that it is not mentioned and none of the Tudor arrows found on the Mary Rose are reported to have been reinforced by wedge shaped inserts. As using wedge shaped reinforcement is both more difficult and expensive (using more horn as it does and requiring more work) but offers no performance improvements, it is highly unlikely that the crown would have paid for such arrows for use by their troops.
Craig.
kevinsmith5:
Good.
I've been racking my brains trying to figure out how on earth someone using medieval tools could ever be able to rapidly produce those wedge nocks me coming up dry. One wonders if the massive numbers of arrows used in set battles would even have had reinforcements at all. They were essentially single use weapons that might well only be unpacked the momnwt they were to be shot. Would the single use nocks really require durability added by a horn insert? Or would this be a feature only to be found in target and hunting arrows?
adb:
The horn insert in the nock was to reinforce it so it wouldn't split under the massive pressure exerted by heavy draw weight bows used for war.
gianluca100:
I wrap my selfnocks tightly with linen string and put some glue on the wrapping. Up to 80 pounds I never had the slightest trouble with arrow splitting.
I don't know if this system would also work with 100+ pound warbows. Anybody tested this?
ciao,
gian-luca
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version