Information and Resources > Trading Post

Need 4 inch round aluminum

(1/2) > >>

rileyconcrete:
I am in need of a solid 4 inch by 6 inch long piece of aluminum. If you have anything like this let me know as I can machine what I need out of it. Can be slightly smaller also. 

I have sinew to trade, plenty of obsidian also.

Thanks tell

RBLusthaus:
I have about 30 bars (?) of alum that are each about 14 inches long and about 3 inches wide and about 1/4 inch thick.  I will measure tonite and give more exact measurements.  They are all stamped "Alcoa" with other markings as well.  Will take and post pics if interested. 

Russ

rileyconcrete:
Guess I should have put solid round stock.  Thanks for the reply RB.
Tell

RBLusthaus:
ahh, round - no, I don't have that, sorry.  I see now your header says round too. 

Good Luck.

Russ 

rileyconcrete:
Thanks Russ.

Sonny I was hoping to trade to keep costs down.

Tell

Navigation

[0] Message Index

[#] Next page