Main Discussion Area > Primitive Skills
rabbits skinning, tanning, eating
richardzane:
I posted this blanket I made before but this is what Anasazi is talking about.
its alot easier to twist the fur strips over twine when the twine is stretched taut.
this one If i remember correct, was made of aprox. 120 rabbits. some strands were double wrapped
the skins don't have to be "tanned" but they should be softened ...just watch for D#$% moths!
BowEd:
richardzane....That's pretty darn cool..uhhh I mean a very warm blanket there.Looks like a time consuming project there.Congrats.What does that blanket measure in size?
darwin....here is an alternative tan for you.I've used it dozens and dozens of times on lots of different hides.No smell.No deterioration when getting wet.Drying back soft again with a little scuffing.Alumunum sulfate and pickling salt on a 1 to 2 ratio in weight.Do it in a 5 to 30 gallon plastic container depending on how many you want to do.Cover with soft water,enough that they are suspended so you can readjust their position in the solution twice a day.The trick with rabbit hides is that you have to flesh and salt them to dry to set the hairs in good prior to tanning.That way you don't have any shedding of hair later on.Neats foot oil is massaged in after they are partially dry to help keep them supple.A pound of aluminum sulfate and two pounds of pickling salt will do 1 deer hide in a week or so,so adjust your measurements accordingly for smaller projects,but don't worry if you put too much it is'nt toxic or anything and won't ruin the hide.
richardzane:
the blanket WAS aprox. 4' x 5 1/2'. that thing was amazingly warm in winter...and HEAVY.
I say "was" because moths destroyed it :(... i was trying to do it as authentically as i'd imagine ancestors could have done
the rabbit project took over a few years, and trying to learn the process of fur tanning/softening.
probably only 2/3 of the hides I "tanned" made it. I didn't tube skin them or salt them(which in hind sight DOES seem like a good idea)
I tacked them out as round as i could and cut them into circles (for spiral cutting)
where does one get aluminum sulfate ?
BowEd:
You get a maximum effort nod from me making that blanket.I could see that had to take a long time.I'm not surprised the hide deteriorated on you either.There is'nt a rabbit hide out there that I've seen that does'nt shed some amount of hair [even the rabbit lined gloves] at one time or another but setting the root hairs in good salting & drying is your best chance of reducing that.
Aluminum sulfate can be looked up for on the computer.It is in a granular form.It is not a dangerous chemical.In fact it can be ingested with no ill affects.Even then though I did'nt try that......LOL.The salt used needs to be a pickling salt gotten at grocery stores.It does'nt have the iodine in it.This process keeps the pests away.
richardzane:
'preciate the good advice about salting and alum. sulf.
don't know if i'll ever do another one...but it sure was a great learning process!
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version