Main Discussion Area > HowTo's and Build-a-longs

braided handle for a bow

(1/2) > >>

richardzane:
here are some step by step pics for making this complete braided handle.
I used calfskin lacing for this project.
and you'll need some of those lacing needles(the best are those brass ones where the lacing end is inserted)
some artifical sinew or cord, and i use some black electrical tape (but its not necessary)
here are the first four pics

richardzane:
here are the rest:
if you have any questions let me know.
obviously you can use multiple color lacing to get different woven patterns.
it would be nice using rawhide lacing too but i haven't tried that.

Cameroo:
Nicely done Richard.  I attempted something similar a while back and had been meaning to post it for a while, so I'm glad you brought it up.  I'll just add this picture to show how you can mix things up a bit by using different colors and varying the pattern of the weave.  The possibilities are pretty much only limited by your imagination.  The more strands you use, the more detailed your pattern can be.  The key is to keep everything as tight as possible (which I could have done a better job of below, but this was my first crack at it)

richardzane:
yeah!  nice job Cameroo!

hedgeapple:
those are beautiful guys.  I think that a handle wrap I could make.  I have difficult time getting the leahter tight enough without leaving gaps for my odd shaped handle.  Lacing smaller pieces of leather just might be the ticket. 

Navigation

[0] Message Index

[#] Next page