Author Topic: Wood species question?  (Read 2480 times)

0 Members and 1 Guest are viewing this topic.

Offline Puma

  • Member
  • Posts: 11
Re: Wood species question?
« Reply #15 on: February 20, 2013, 02:03:02 am »
Impossible to tell from bark pictures. I second the notion that you need leaves or you can cut a small piece and get it to a university where they can examine it under a microscope. They'll do it for free. A few years ago I felled an unknown tree in the winter and the local university figured it out for me.

Offline tgtmatt

  • Member
  • Posts: 212
Re: Wood species question?
« Reply #16 on: February 28, 2013, 09:33:54 am »
Another question guys! What type of wood does this look like, I believe it is some type of oak.


And also, what does checking look like on the back of a stave? I have never seen pictures before and I am curious. Also, how long does it take to begin checking? (average) because I know it will be different for different woods.

Offline tgtmatt

  • Member
  • Posts: 212
Re: Wood species question? Another question:)
« Reply #17 on: February 28, 2013, 09:34:46 am »
Two more pictures

Offline RidgeRunner

  • Member
  • Posts: 1,153
Re: Wood species question?
« Reply #18 on: February 28, 2013, 10:04:53 am »
Last two look like Sweetgum.
See the gray on the inside on the 1/2 log....  Looks like spalting.
Spalting is the first stages of rot.   Sweetgum rots real fast if given the chance.

David
David Key / N.W. Alabama

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: Wood species question?
« Reply #19 on: February 28, 2013, 10:20:56 am »
  The first pic. is differntly red oak,next is a suckie pic. but it could be elm or ash. Perrty sure bt the bark the last is hickory. Really hard to tell by just one pic.
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING

Offline tgtmatt

  • Member
  • Posts: 212
Re: Wood species question?
« Reply #20 on: February 28, 2013, 10:27:53 am »
Those pictures are all of the same tree I had cut down.