Information and Resources > Trading Post
Bit of a longshot, anyone have an electic motor?
Pat B:
Jonathan. I have an old Sears joiner that you can have the motor if you take the whole thing. ;) I'm not sure what size motor but I can check. You will have to come and get it.
bigpapa:
I built mine using a bench grinder, and dimmer switch. One side is the belt sander the other side has a big flapper wheel on it.
jonathan creason:
--- Quote from: Pat B on March 07, 2013, 12:11:07 am ---Jonathan. I have an old Sears joiner that you can have the motor if you take the whole thing. ;) I'm not sure what size motor but I can check. You will have to come and get it.
--- End quote ---
If you get a chance to get the specs from the motor that would be great, Pat. I appreciate it.
sleek:
I have an electric weed eater motor... idk if that's worth anything to you?
Pat B:
I can't find a tag on thre motor but it is 7" in diameter and about 5" long. I'd guess 1/2hp to 3/4hp. I'll try to get a better look and see if I can find an info tag. The joiner is 4' long and weighs a ton.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version