Author Topic: 48#basic no-frills hackberry  (Read 5931 times)

0 Members and 1 Guest are viewing this topic.

Offline ohma2

  • Member
  • Posts: 960
Re: 48#basic no-frills hackberry
« Reply #30 on: June 03, 2013, 12:42:40 pm »
man what a great lookin bow that is in all respects, just eye candy.

Offline Carson (CMB)

  • Member
  • Posts: 2,319
Re: 48#basic no-frills hackberry
« Reply #31 on: June 03, 2013, 01:58:32 pm »
That is sweet! I really like that design.   8)
"The bow is the old first lyre,
the mono chord, the initial rune of fine art
The humanities grew out from archery as a flower from a seed
No sooner did the soft, sweet note of the bow-string charm the ear of genius than music was born, and from music came poetry and painting and..." Maurice Thompso

Offline rps3

  • Member
  • Posts: 1,514
Re: 48#basic no-frills hackberry
« Reply #32 on: June 03, 2013, 02:11:49 pm »
Looks good.

Offline danny f

  • Member
  • Posts: 656
Re: 48#basic no-frills hackberry
« Reply #33 on: June 03, 2013, 04:28:20 pm »
thats a beautiful bow. full draw says it all nice job.

Offline BowJunkie

  • Member
  • Posts: 283
Re: 48#basic no-frills hackberry
« Reply #34 on: June 03, 2013, 09:06:25 pm »
Another fine looking bow there Mr. Zane
If I may ask,, what radius did you use to flip those tips?
The reason I ask, I have 24 staves of hack berry from a tree I cut down back in November.
All are in roughed out dimensions " wide / thick", and have taken very small amounts of twist, if any. I am just taking notes, so when I start making bows again. Any input working with hack berry would be greatly appreciated.
Keep up the good work.
Johnny
in Texas

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: 48#basic no-frills hackberry
« Reply #35 on: June 03, 2013, 10:12:14 pm »
Wow, really fine bow. I like the nocks.
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline richardzane

  • Member
  • Posts: 500
  • active Wyandot tribal member
    • richardzanesmith.wordpress.com
Re: 48#basic no-frills hackberry
« Reply #36 on: June 03, 2013, 11:03:24 pm »
appreciate the comments, everyone, they encourage alot.

BowJunkie,
I wasn't very scientific at all. :)
here is a pic of the form i bent it on it. no geometric measurements
just bent a long steel ruler to get a penciled curve that seemed "good enough"

mine have ALL had some twists too. I straighten those using dry heat some days after steam bending of the tips. I made a wooden wrench-like tool, heat the limb till it finally bends further than i want it, and just hold it there till its cool. so far thats been enough to fix the twist, but i've only made about 15 bows so i'm still learnin in the school of hardknots!
when i'm working on things my ancestors worked, singing the songs my ancestors sang, dancing the same dances, speaking the same language, only then  I feel connected to the land, THIS land, where my ancestors walked for thousands of years...

Offline Josh B

  • Member
  • Posts: 3,741
Re: 48#basic no-frills hackberry
« Reply #37 on: June 04, 2013, 01:05:10 am »
Nicely done sir!  That is very nicely done!  Josh