« previous next »
Pages: [1]

Author Topic: Good paste wax to go over a matte tung oil finish?  (Read 8295 times)

0 Members and 1 Guest are viewing this topic.

Offline toomanyknots

  • Member
  • Posts: 3,132
Good paste wax to go over a matte tung oil finish?
« on: July 16, 2013, 06:09:26 pm »
Anybody recommend a paste wax to put over a matte tung oil finish? My bows have just seemed a bit dull lately, been wondering about finding a paste wax product to put a good shine over my bows, something to get em looking sharp, ya know? :) I guess I could just start using a gloss finish like tru oil or something. I was thinking of grabbing up something from woodcraft tonight. Also, now that I think of it, some guy told me you can pick up the little bottles of tru oil from dicks sporting goods, anybody know if this is true?
« Last Edit: July 16, 2013, 10:05:08 pm by toomanyknots »
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline JonW

  • Member
  • Posts: 1,906
Re: Good paste wax to go over a matt tung oil finish?
« Reply #1 on: July 16, 2013, 06:23:45 pm »
You can prolly get Tru-oil at Dick's. I get mine from Academy Sports.
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: Good paste wax to go over a matt tung oil finish?
« Reply #2 on: July 16, 2013, 07:26:41 pm »
trewax, natural carnuba clear paste wax, it's for hardwood floors, atleast that's what i'm using, got it at tru value
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Hrothgar

  • Member
  • Posts: 1,475
Re: Good paste wax to go over a matt tung oil finish?
« Reply #3 on: July 16, 2013, 08:24:23 pm »
Don't normally use paste wax, but have used Johnson Paste wax, turned out ok.
Logged
" To be, or not to be"...decisions, decisions, decisions.

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: Good paste wax to go over a matt tung oil finish?
« Reply #4 on: July 16, 2013, 08:40:43 pm »
Does the wax leave a nice finish yall? Is it glossy like a normal beeswax finish? Or will it be kinda matte?
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline bubby

  • Member
  • Posts: 11,054
Re: Good paste wax to go over a matt tung oil finish?
« Reply #5 on: July 16, 2013, 08:59:59 pm »
I think it gives a nice satin finish,
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline whitefeather

  • Member
  • Posts: 53
  • I love Gods critters beside mash potatoes & gravy.
Re: Good paste wax to go over a matt tung oil finish?
« Reply #6 on: July 16, 2013, 09:08:59 pm »
I used johnsons paste wax . Worked pretty good for me.
Logged

Offline Roy

  • Member
  • Posts: 1,079
Re: Good paste wax to go over a matt tung oil finish?
« Reply #7 on: July 16, 2013, 09:14:00 pm »
How many coats of tung oil do you apply? I apply 4 at least, sometimes 5. You have to let each coat dry for 24 hours before applying the next coat. I have used Johnson's paste wax but not very often. After 4 coats, most of my bows take on a really nice satin glisten finish.
Logged

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: Good paste wax to go over a matt tung oil finish?
« Reply #8 on: July 16, 2013, 10:00:43 pm »
Quote from: Roy on July 16, 2013, 09:14:00 pm
How many coats of tung oil do you apply? I apply 4 at least, sometimes 5. You have to let each coat dry for 24 hours before applying the next coat. I have used Johnson's paste wax but not very often. After 4 coats, most of my bows take on a really nice satin glisten finish.

I do about two or 3, but it takes about 2 weeks between each coat at the least because I use the straight stuff from woodcraft, the pure un cut tung oil. It takes forever to cure. I don't like normal tung oil finishes from lowes because I hate smelling the solvents,  ;D. Especially naptha.
« Last Edit: July 16, 2013, 10:04:23 pm by toomanyknots »
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline rossfactor

  • Member
  • Posts: 805
  • Humboldt County CA
Re: Good paste wax to go over a matte tung oil finish?
« Reply #9 on: July 17, 2013, 03:24:25 am »
I put a 50/50 beeswax/mineral oil paste over my Tung oil finishes. Cuts the shine down and adds another layer of water proofing and gives a warm feeling rubbed in finish.

Gabe
Logged
Humboldt County CA.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Good paste wax to go over a matte tung oil finish?
« Reply #10 on: July 17, 2013, 07:34:04 am »
I use one coat of shellac, 4-6 coats of Tung oil  and then 3-4 coats of Johnsons paste wax. Its an absolute gorgeous finish and I cant take a lick of credit for it. Try the Johnsons paste wax. Its a big yellow can. You wont be disappointed.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: Good paste wax to go over a matte tung oil finish?
« Reply #11 on: July 17, 2013, 09:26:28 am »
Quote from: PEARL DRUMS on July 17, 2013, 07:34:04 am
I use one coat of shellac, 4-6 coats of Tung oil  and then 3-4 coats of Johnsons paste wax. Its an absolute gorgeous finish and I cant take a lick of credit for it. Try the Johnsons paste wax. Its a big yellow can. You wont be disappointed.

Will do.
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair
Pages: [1]
« previous next »