Main Discussion Area > Arrows

Serrations

(1/2) > >>

Kegan:
Okay, so a serrated broadhead is more potent than a straight bladed one, would the serrations on a steel head be better on the entire length, or just on the back? Oh, and which is better, sveral deep agressive onses , or lots of very small ones? Thanks in advance :).

mullet:
  I like the small ones.It doesn'tseem to drag as much hair or grab and slow penetration.

Pat B:
One of the Wensel Bros did an article in TBH a few years ago about adding serrations to your steel broadheads. He would add them to the back 1/3 of the blade.
   On steel heads with a single bevel I will rake the corner of my file down the edge then a light dressing on front and back. This gives a fine serration along the entire edge. I never could get a good consistent fine razor edge on any blade. This courser edge has worked well.    Pat

DanaM:
Agree with pat I just file mine leaving a burr, I don't bother with a hone.
Gotta agree that big serrations will just grab and stick

Kegan:

--- Quote from: Pat B on November 28, 2007, 12:25:02 am ---   On steel heads with a single bevel I will rake the corner of my file down the edge then a light dressing on front and back. This gives a fine serration along the entire edge. I never could get a good consistent fine razor edge on any blade. This courser edge has worked well.    Pat

--- End quote ---

Hmmm... I'm having toruble following, got a picture?

Navigation

[0] Message Index

[#] Next page