Main Discussion Area > HowTo's and Build-a-longs

Getting horn laminations from gemsbok horn.[Pics added]

<< < (8/14) > >>

BowEd:
Almost done.

BowEd:
Oops a little crack on the end.No matter there is still plenty of length here.Right now 25".

BowEd:
Now both are done and it's over to my spindle sander.ve my spindle sander.I flatten them from the inside of the horn then get my width.

BowEd:
I cut a little off of each one after sanding.I left myself with 22" long.A little over 1and1/2" wide on big end and a little over an inch on the small end.Plenty for even a 64" bow.

BowEd:
No twist and flat as Aunt Jamimas pancakes.

Navigation

[0] Message Index

[#] Next page

[*] Previous page