Author Topic: Nock Point Question  (Read 1038 times)

0 Members and 1 Guest are viewing this topic.

Offline CherokeeKC

  • Member
  • Posts: 574
  • PM108323
Nock Point Question
« on: September 29, 2013, 02:53:36 pm »
Do you guys just use the metal clamp type nock points on your strings?  Or do you just use an indicator like a different color wrap right above nock point?  I don't think I want to use the metal clamp type on a primitive bow and would rather keep it as natural as possible even though Im using B50 string.
Aim Small...Hit Small

Offline Del the cat

  • Member
  • Posts: 8,291
    • Derek Hutchison Native Wood Self Bows
Re: Nock Point Question
« Reply #1 on: September 29, 2013, 03:00:59 pm »
I'm with you...
I usually tie some waxed nylon lacing cord (it's a bit like artificial sinew) to build up a little bump above and below where the arrow nocks.
Sometimes, I just tie the top one.
Del
Health warning, these posts may contain traces of nut.

Offline dbb

  • Member
  • Posts: 745
Re: Nock Point Question
« Reply #2 on: September 29, 2013, 03:02:15 pm »
I use servingthread and do a whipknot,
The beauty of that is if you dont tighten the knot too hard and leave the tags a bit long you can finetune  it by twisting it up or down like its threaded.
When you are happy just tighten and trim.
It's better to ask and look like a fool than not to ask and remain one...

Offline wood_bandit99

  • Member
  • Posts: 234
  • Shoot straight my friends!!
Re: Nock Point Question
« Reply #3 on: September 29, 2013, 04:53:19 pm »
I use both. Depends how lazy I feel  :o  they both don't hurt my hands so I go back and forth.
Yew and osage, BEST. WOODS. EVER! Shoot straight my friends!!!

Offline CherokeeKC

  • Member
  • Posts: 574
  • PM108323
Re: Nock Point Question
« Reply #4 on: September 29, 2013, 09:32:18 pm »
Thanks for the replies guys.  I will try the serving or B50 indicators
Aim Small...Hit Small