« previous next »
Pages: [1]

Author Topic: Pacific Ninebark  (Read 3123 times)

0 Members and 1 Guest are viewing this topic.

Offline DC

  • Member
  • Posts: 10,396
Pacific Ninebark
« on: June 05, 2019, 03:03:41 pm »
Does anyone have any experience with Ninebark? I collected this piece today after seeing some at the Vancouver Island Wood Bow Gathering. It looks like a west coast Laburnum, gorgeous wood. The piece I found was dead on one side so I only got one billet but there is more there and I'll be getting some. Apparently the First Nations people made children's bows from it. Any drying info? The piece in the picture is 2 1/4" dia and the heartwood is 1 1/2".
Logged

Offline Hamish

  • Member
  • Posts: 1,479
Re: Pacific Ninebark
« Reply #1 on: June 05, 2019, 03:48:31 pm »
Any idea what its scientific name is?
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Pacific Ninebark
« Reply #2 on: June 05, 2019, 04:02:38 pm »
Physocarpus capitatus
Logged

Online bjrogg

  • Member
  • Posts: 10,831
  • Cedar Pond
Re: Pacific Ninebark
« Reply #3 on: June 05, 2019, 04:09:30 pm »
Hope it works out DC. Looks like it'd make a beautiful bow if you could use it like yew. Really nice contrast. Maybe you could do a bend test.
Bjrogg
Logged
A hot cup of coffee and a beautiful sunrise

Offline DC

  • Member
  • Posts: 10,396
Re: Pacific Ninebark
« Reply #4 on: June 05, 2019, 04:30:20 pm »
I've got a small piece somewhere that I collected 4-5 years ago. It doesn't have any heartwood but if I can find it I'll bend it. ;D
Logged

Offline wizardgoat

  • Member
  • Posts: 2,397
Re: Pacific Ninebark
« Reply #5 on: June 05, 2019, 05:28:18 pm »
I’ve only made a kids bow from it, but it seems like good stuff, somewhere in between ocean spray and hazel. Mine was only sapwood, has a very large pith, tough to find any large pieces.
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Pacific Ninebark
« Reply #6 on: June 05, 2019, 06:43:22 pm »
I found some that is 6-8" in diameter but only 2' is even straightish. it seems to grow in the thickest, most tangled part of the bush. Hard for an old guy to crash around in. ;D ;D
Logged

Offline upstatenybowyer

  • Member
  • Posts: 2,700
Re: Pacific Ninebark
« Reply #7 on: June 05, 2019, 06:44:55 pm »
It sure is purdy.
Logged
"Even as the archer loves the arrow that flies, so too he loves the bow that remains constant in his hands."

Nigerian Proverb

Offline Bryce

  • Global Moderator
  • Member
  • Posts: 3,125
  • Pacific Ghost Longbows
Re: Pacific Ninebark
« Reply #8 on: June 05, 2019, 10:45:40 pm »
It’s good wood, but like most of our woods don it needs to dry slow. Give it a flat belly and fair amount of heat treating. Tension is really nice on this wood.
Logged
Clatskanie, Oregon

Offline DC

  • Member
  • Posts: 10,396
Re: Pacific Ninebark
« Reply #9 on: June 06, 2019, 07:08:54 am »
Do you split it or saw it Bryce? It looks pretty twisted.
Logged

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Pacific Ninebark
« Reply #10 on: June 06, 2019, 07:57:40 am »
Beautiful
Logged

Offline Hawkdancer

  • Member
  • Posts: 5,027
Re: Pacific Ninebark
« Reply #11 on: June 06, 2019, 09:49:18 am »
Nice looking wood!  Good luck with the build!
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry

Offline Bryce

  • Global Moderator
  • Member
  • Posts: 3,125
  • Pacific Ghost Longbows
Re: Pacific Ninebark
« Reply #12 on: June 06, 2019, 10:19:45 pm »
Quote from: DC on June 06, 2019, 07:08:54 am
Do you split it or saw it Bryce? It looks pretty twisted.

Saw it, np.
Logged
Clatskanie, Oregon

Offline DC

  • Member
  • Posts: 10,396
Re: Pacific Ninebark
« Reply #13 on: June 07, 2019, 08:38:27 am »
Thanks Bryce
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Pacific Ninebark
« Reply #14 on: June 08, 2019, 11:30:27 am »
I made a quickie bow from the Ninebark branch I've had for 4-5 years. It's beautiful wood to work. Likes the block plane, spoke shave, rasp and scraper. Steam bends like a dream and doesn't stain from the steam. The branch was 1 1/4" dia at the handle. I got 30# at 27". I think I could have gotten more if I hadn't cut too close to the center when I roughed it out 4-5 years ago. Can you tell I like this wood? :D
If anyone is wondering about the name this is what the bark looks like.
Logged
Pages: [1]
« previous next »