Main Discussion Area > At the Forge

from file to knife

<< < (8/18) > >>

killir duck:
nice build Kevin, don't know if you mentioned it or not but brass brazing rod works great for the pins.

koan:
Thanks Kevin! I have been wanting to try this for a long time and you answered all my questions.. And that blade is awesome!!... Brian

Danzn Bar:
Great build -a-long Mr. Halverson....
Would a little flame bring out that purty grain?
DBar

bowtarist:
That was great KH. I've made several out of files and learned a lot from you on this thread.  I've never used the danish oil, but am using some tru oil on the ones I'm making now.

Have a gooder, dp

KHalverson:
killer duck
brazing rod does make great pins and cheaply too.
when I first got started building knives I used nails and all sorts of welding rods  aluminum- stainless and what ever else I could get my hands on.

Danzn bar

yes it would.
but I would be carefull not to get em too hot or the epoxy may release.

bowtarist

thanks.
I cannot wait to see some pics  of your builds.

Kevin

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version