Author Topic: Mulbery  (Read 2282 times)

0 Members and 1 Guest are viewing this topic.

Offline stringstretcher

  • Member
  • Posts: 1,557
    • Traditionalarcherycommunitysite.com
Mulbery
« on: December 25, 2013, 08:10:48 am »
Has anyone tried using mulberry as an arrow material?

Offline artcher1

  • Member
  • Posts: 1,114
Re: Mulbery
« Reply #1 on: December 25, 2013, 08:40:00 am »
I've not had any luck with the wood Charles. That and flowering dogwood. But both make very good footing/foreshafts.........Art

Offline stringstretcher

  • Member
  • Posts: 1,557
    • Traditionalarcherycommunitysite.com
Re: Mulbery
« Reply #2 on: December 25, 2013, 10:30:02 am »
Thanks Art.  How would you rate the osage arrow that you made?

Offline artcher1

  • Member
  • Posts: 1,114
Re: Mulbery
« Reply #3 on: December 25, 2013, 11:54:36 am »
Osage is just a different animal, be it for a bow or arrow Charles. I've made a couple Osage shafts that couldn't be straightened, period. You could heat the shafts, getting them super hot, and almost bend them double, and they would go back to their original crooked position. Physical weight is heavy, spine medium to light. Probably the more yellow/lighter color, low density Osage would be more suitable for arrows..........Art

Offline caveman2533

  • Member
  • Posts: 640
  • Steve Nissly
Re: Mulbery
« Reply #4 on: December 28, 2013, 11:41:54 am »
Will Mulberry darken in color like Osage does over time?

Offline artcher1

  • Member
  • Posts: 1,114
Re: Mulbery
« Reply #5 on: December 28, 2013, 12:04:10 pm »
Yes, mulberry can get very dark over time Caveman..........Art

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,520
Re: Mulbery
« Reply #6 on: December 28, 2013, 02:45:05 pm »
Aged mulberry can look like aged osage after a while. Hard to tell them apart by looks.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline caveman2533

  • Member
  • Posts: 640
  • Steve Nissly
Re: Mulbery
« Reply #7 on: December 28, 2013, 06:19:22 pm »
Thanks I cut some slabs to use a knife handles and wondered if they will  get darker.