Main Discussion Area > Arrows

Shaft spiner?

<< < (3/10) > >>

Pat B:
Thanks Justin, Actually that's Art's spine tester but mine is a poor copy of his.
Here is a link to Art's discussion and pics of his tested:
   http://primitivearcher.com/dc/dcboard.php?az=show_topic&forum=7&topic_id=14679&m
Boy I hope that's right. I just got writers cramps in my hand...and my brain.  lol
      Pat

Justin Snyder:
That spiner has wheels on the end where the arrow sets so it should double as a arrow spinner or a hand spun crester.  Save us all a lot of space. Justin

Pat B:
Justin, I got my roller bearings from a skateboard shop for only a few dollars. They work very well for this application.   Pat

Bow Bandit:
i have mine set up to 26 inches and on his site he constantly says 26 inches ??? should i change it to 28???

Thanks Brandon

Pat B:
Brandon, Those 2" will make a heck of a differance. Test a arrow with a known spine and adjust your spine chart to that. I'm not an expert on this. I just go by what was told to me.   Pat

Navigation

[0] Message Index

[#] Next page

[*] Previous page