Main Discussion Area > Flintknapping
Folsom and some re fluting
Outbackbob48:
Was'nt happy with yesterdays flute that ran out the side , also looked thick enough for a reflute so I set it up an POW almost to the tip :o I left nipple an everything on it an called it good. Got out a pc of texas an went for some flutes on a little harder material( up the learning curve) :o 1 st flute went right off the end and the 2nd stopped about 3/4" shy of end. trimmed her up an came up with probably my best to date folsom ;D Thanks for lookin Bob, ps hope everyones staying warm, -7 here this morning.
Hey Jesse Thanks Again, never would have got here with out all your help.
mullet:
Hard to get a Folsom much better then that.
Dalton Knapper:
Nice work...You can't argue with your success on that point.
I'd like to be able to make one of those some day. What method did you use to blow those channels out (I mean jig, indirect, direct or other)?
Outbackbob48:
I made a guillotine jig this fall.
Trapper Rob:
Sweet points Bob.
Navigation
[0] Message Index
[#] Next page
Go to full version