Main Discussion Area > Arrows
Cresting set up
1/2primitive:
I was looking at the cresting jigs in 3 Rivers, and figured, "I can make one, all I need is a motor". So, I did. I found my Dad's cordless drill and put the flathead screw adapter on it. Then I cut a 'V' shape into a scrap piece of cedar, and I had my cresting jig. Later I found that it is best to put the tip of the arrow into something (say, a box) to keep it in position.
Here's the set up, it works very well!
http://i113.photobucket.com/albums/n236/Thebowguy/000_0014-2.jpg
http://i113.photobucket.com/albums/n236/Thebowguy/000_0012-2.jpg
http://i113.photobucket.com/albums/n236/Thebowguy/000_0017-2.jpg
http://i113.photobucket.com/albums/n236/Thebowguy/000_0017-1.jpg
http://i113.photobucket.com/albums/n236/Thebowguy/000_0016-2.jpg
Sean
Justin Snyder:
Looks great Sean. I discovered that the slower it spins the better it works for me. Justin
mullet:
Good idea Shawn and nice job on the arrows.When you get around to making a permanent one ,a BBQ rotisserie motor works good.
Pat B:
...or an old sewing machine motor! ;)
Cool arrows Sean. You are doing a nice job on your cresting and fletching. My cresting looks like a drunk did it! ;D Tell me about your arrow with the split fletching. How do they fly? Noisy? Pat
1/2primitive:
Thanks, guys, and great ideas.
Pat, the arrow in question did fly very well, I just broke it today. :( The only problem was in drawing, the feathers would push the arrow out from the bow, so I will probably only use it for decorative arrows in the future, 'cause it sure looks nice!
Sean
Navigation
[0] Message Index
[#] Next page
Go to full version