Author Topic: Best way to split an osage stave with a branch.  (Read 5397 times)

0 Members and 1 Guest are viewing this topic.

Offline Prarie Bowyer

  • Member
  • Posts: 1,599
Re: Best way to split an osage stave with a branch.
« Reply #15 on: July 12, 2014, 12:08:59 pm »
Well the tree I thought was Osage turned out to be mulberry.  Got some.  There is still Osage out there.  And some thing that has been down for a while, makes tan saw dust and is hard enough to slow down my katana boy.   Smells vinegarish.   Elm?

Found another smaller down Osage but it is on the ground, bark is on but loosening.  Black streaks I the end grain.   Long straight 10" trunk.  Going to be a muddy mess to remove.


Offline Pat B

  • Administrator
  • Member
  • Posts: 37,531
Re: Best way to split an osage stave with a branch.
« Reply #16 on: July 12, 2014, 01:41:05 pm »
Elm would rot pretty quickly. Sounds like locust.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC