Main Discussion Area > HowTo's and Build-a-longs
my build along with loefflerchuck (finished)
loefflerchuck:
Looking good. How do you plan on doing the 5 curve? I usually bend the tips by hand and foot and then the handle over the knee. If you want to cut out a form that is a fool proof way to go though.
Tyke:
i will probably make a caul so i keep it straight and center i have also built a steam box like the one i built you 3x3x58 with a cap and plat forms to keep it out of the water i will get on building the caul and get steaming ill repost in a couple of days
Tyke:
Here is the caul and steam box
Tyke:
First steaming try fail ill have to remove more wood off the belly to get it bending easier
loefflerchuck:
be careful with that extrene center bend! That may be too sharp of a bend for the wood to stay in one piece. This would turn into a takedown build
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version