Main Discussion Area > Flintknapping

How to get started?

(1/2) > >>

Lee Lobbestael:
Hey guys, I would really love to learn how to knap. I have watched alot of videos on youtube and have tried about twenty bottle bottoms but can't seem to get a feel for it. Where do I start? Thanks guys

Stringman:
Let me point out the obvious... you already have. The difference between yourself, at your present skill level, and someone like Don Tower is simply tonnage.

More specifically, you should search out a bucket of spalls or flakes and put some rock thru your hands. Sounds like you have already received some instruction (via video) but you will need to develop the muscle memory and techniques of the hobby through many hours of practice. Hope I'm not sounding distant, but your question is pretty vague. If you have specific problems that come up, take a pic and post it up. We will do our best to try and help.

Lee Lobbestael:
Thank you. I guess I just have trouble recognizing a good platform and knowing how to send a flake across the piece. I Also seem to just crush edges when I try to pressure flake instead of getting good sharp edges

Sasquatch:
Cause glass is so weak you need to abrade a lot. This will strengthen the edge and allow you to push in harder before you apply pressure outward.  This will help drive flakes further.  Also make sure your platform is below centerline.  Otherwise read and watch videos as much as possible

Ghost Knapper:
How thick are the bottom of the bottles you are using? Old clorox bottles work great but newer bottles being thin make it more challenging. And as always abrade abrade abrade.

Navigation

[0] Message Index

[#] Next page