Author Topic: beaver tail?  (Read 4461 times)

0 Members and 1 Guest are viewing this topic.

Offline JEB

  • Member
  • Posts: 1,735
beaver tail?
« on: March 06, 2015, 10:07:02 pm »
I was given a split beaver tail that has been tanned however it is pretty stiff.  I would like to soften it up a bit so I can use it for a selfbow handle.

Anyone with suggestions on how to do that?

Offline Outbackbob48

  • Member
  • Posts: 2,752
Re: beaver tail?
« Reply #1 on: March 07, 2015, 01:36:29 pm »
Jeb, first off mine were not tanned just air dryed. I soaked them in a pan of water until plyable, towel dryed and wrapped and fitted to handle, sewed up the front and let dry. hard as a rock but still on my bow at least 5 yrs now. Go real easy on the sewing they won't take much stretching. Good Luck Bob
« Last Edit: March 07, 2015, 01:50:11 pm by Outbackbob48 »

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: beaver tail?
« Reply #2 on: March 17, 2015, 07:58:57 am »
If you glue 1/2" wide strip of leather on the inside where the holes get punched, you can pull a bit harder without tear outs.
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Outbackbob48

  • Member
  • Posts: 2,752
Re: beaver tail?
« Reply #3 on: March 17, 2015, 12:03:02 pm »
Pearl, why didn't that ever occur to me :o That's a great tip, Thanks Bob

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: beaver tail?
« Reply #4 on: March 17, 2015, 04:24:19 pm »
You never asked! ;)
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.