Main Discussion Area > Flintknapping

where would i find a choked pressure flaker?

<< < (2/3) > >>

beartail:
the one I seen was like you pull down on the choke slidthe wire up then pushed the choke back down and it locked. or maby it screwed out like a brace and bit and ya screwed it back tight.

turbo:

--- Quote from: beartail on May 25, 2015, 09:48:56 am ---the one I seen was like you pull down on the choke slidthe wire up then pushed the choke back down and it locked. or maby it screwed out like a brace and bit and ya screwed it back tight.

--- End quote ---

Flintknappingtools.com sells a 'twist lock' pressure flaker. Not sure if it's what you are talking about but you can find it here:

Knapper:
Don't know about a choke flaker but I got one that was strangled once >:D Then thrown across the shop! :o
knapper

cowboy:
 ;D ;D :o

JackCrafty:
I think the "choke" you're talking about is called a "pin vice".  It works similar to a drill chuck and hold various diameter wire, pins, etc.

---http://www.traditionalwoodworker.com/Pin-Vise-with-Precision-Chuck/productinfo/500-51164/

Navigation

[0] Message Index

[#] Next page

[*] Previous page