« previous next »
Pages: [1]

Author Topic: Compression test  (Read 1619 times)

0 Members and 1 Guest are viewing this topic.

Offline DC

  • Member
  • Posts: 10,396
Compression test
« on: October 06, 2015, 07:03:56 pm »
Is there a way to tell if a piece of wood is good in compression? I have some Bitter Cherry. I cut a 1/2"x 1/2" piece and it snapped like a matchstick so I'm pretty sure it's no good in tension but if there was a way to test compression I could back it with bamboo. I've heard that some cherry is good in compression.
Logged

Offline DavidV

  • Member
  • Posts: 472
Re: Compression test
« Reply #1 on: October 06, 2015, 08:11:58 pm »
Black cherry is weak in tension but I wouldn't go necessarily say it's good in compression. I think maple or something with moderate tension would be a better backing.
Logged
Springfield, MO

Offline Badger

  • Member
  • Posts: 8,119
Re: Compression test
« Reply #2 on: October 06, 2015, 08:20:57 pm »
    Cherry is a very fast belly wood, low in histrisis. It will chrysal if pushed in to a too tight bending area. Give it plenty of limb to bend and it will make a nice bow. This is for black cherry, no experience with bitter cherry.
Logged

Offline bowandarrow473

  • Member
  • Posts: 696
Re: Compression test
« Reply #3 on: October 06, 2015, 10:28:01 pm »
I have heard that a cherry bow will be very fast and sweet if it holds together. I have also heard that the stuff generally likes to snap and that it is poor in tension and moderate in compression.
Logged
Whatever you are, be a good one.
Pages: [1]
« previous next »