« previous next »
Pages: [1]

Author Topic: Cane handle wrap  (Read 2408 times)

0 Members and 1 Guest are viewing this topic.

Offline ccase39

  • Member
  • Posts: 177
  • Loving to learn
Cane handle wrap
« on: October 29, 2015, 07:53:53 pm »
I have some thin can and would like to use it to wrap a handle. I know you soak it first but can't find any videos of the process. Advice?
Logged
Reading
The Traditional Boyers Bible Vol 1
The Bent Stick

Working on bow #7

Offline KS51

  • Member
  • Posts: 80
Re: Cane handle wrap
« Reply #1 on: October 29, 2015, 07:59:50 pm »
I just soak it in warm water for about 10 minutes.  Re-wet with a damp cloth if it starts to dryout while wrapping.

Ken
Logged

Offline wizardgoat

  • Member
  • Posts: 2,397
Re: Cane handle wrap
« Reply #2 on: October 29, 2015, 08:46:32 pm »
If it's brittle soak it in warm water. If it's pliable  and your handle curves aren't too aggressive you don't need to soak.
Towel them off good if you do and wrap away. You can use super glue, but I use a hot glue gun now. Dries very fast, and isn't so gross to use.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,516
Re: Cane handle wrap
« Reply #3 on: October 29, 2015, 11:18:59 pm »
How wide is the caning? The thinner it is the longer the strand needs to be so you don't have a splice in it. I think it's something like 15' long for 1/8".   I wrapped it like I do string serving with both ends tucked under the wrap and add super glue around the top and bottom edge and between the wrap where the tags are tucked under.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC
Pages: [1]
« previous next »