Main Discussion Area > Primitive Skills

Leather working tools

(1/3) > >>

DC:
I want to make a tool for punching lacing holes along the edge of handles. I see three kinds of multi hole punches. One makes holes like //// another like this ---- and another like ''''. Is one better, as in stronger or is it just for looks? I'm planning on stealing a fork from the kitchen and modifying it.

osage outlaw:
I have one with flat teeth like this ----   They have bent a little and aren't in line any more.  I got some other ones off of the big auction site that have beefier teeth at a slight angle. They seem more sturdy and won't bend as easy as the flat teeth.  I'll PM you the link.

DC:
Got it, thanks OO

Pat B:
All of the leather work I've done I've used the ------- style of stitching with running stitches and saddle stitching.

Ranasp:
I've been doing some leatherworking for a little while and have done some research into it.  Just to be clear, you're talking about lacing chisels and not pricking irons, yes?  The first is for lace (flat cord) the latter is for stitching with sinew, waxed thread and that kind of stuff.

   If you're interested in pricking irons and the different brands (which will clue you in to quality) take a look at Nigel Armitage's videos.  They're a bit long, but you'll be amazed at what you can learn.  https://www.youtube.com/watch?v=ThGbDAcK04o  is the first one about pricking irons. 

If you're talking chisels for lace, a fork is good for marking places but the tines will bend in short order and not be wide enough for lace to boot.  Well, that's if you're talking cheap forks, maybe you have a thick solid one you can work with.

Navigation

[0] Message Index

[#] Next page