Main Discussion Area > English Warbow

I need some advise and pics

<< < (10/15) > >>

Pat B:
 Sorry Del. I couldn't help myself.  ::)   I also resemble that remark.  ;D
I have the stakes picked out already. All I have to do is sharpen the ends and push them into the base. I'm working on his battle ax now, have 6 arrow shafts that need points and fletching then his sword and possible bag. I'm also working on a helmet for him but its gonna be hard to get the slick shiny finish for the helmet.

Ruddy Darter:
An idea...maybe a skim of wood filler over the mache and then fine sanded prior to painting would result in a smooth surface? Thick acylic paint also sands smooth when fully dry.(also household gloss paint with wet and dry fine cloth)
(If a silver paint is to be used a dark grey/black undercoat with the silver lightly overcoating results in a realistic metal finish, then a satin shine coat of lacquer, a high gloss lacquer/varnish doesn't work as good.)

  Ruddy Darter.

Pat B:
Thanks for the tips. Once the glue dries on the helmet I'll try to sand it smooth or as smooth as possible. I'm using Elmer's Glue(carpenter's glue) so it should sand OK. I'll try the undercoating of the darker colors(grey/black) with a light silver overcoat.
 Did they all carry the small round shield? It looks like one hanging on the belt of some, I guess for hand to hand combat once the arrows are all shot up.

Ruddy Darter:
I believe the buckler shield was pretty standard kit, and yes it was for close quarter fighting used to smash in to the face area and to obscure vision on and post impact as well as protection from weapon blows, as much an attack weapon as a defence. It was carried on to the waist belt.
I just copied this from wiki-

Hand protection: The primary use of the buckler was to protect the sword hand.
Deflector: The buckler's lightness and curved center made it excellent for deflecting attacking blades.
Blinder: The light blades used in conjunction with the buckler depended on rapid movements, which meant that a single second was an important advantage. The wielder of the buckler could use the buckler to shield his sword-hand's position from view, keeping his opponent from guessing his next strike.
"Metal fist": A buckler could be used to directly attack an opponent by punching with either its flat face or its rim.
Binder: The buckler could be used to bind an opponent's sword hand and weapon as well as their buckler against their body. The buckler was also very useful in grappling, where it allowed an opponent's arms to be easily wrapped up and controlled.


This is a generalization of buckler shields, the bowmen's buckler shield had a round protruding centre boss for face rearranging. :o
Here's a good illustration of them in action I reckon,
Ruddy Darter.

Aaron H:
CA glue would give you that slick shiny finish

Navigation

[0] Message Index

[#] Next page

[*] Previous page