Main Discussion Area > HowTo's and Build-a-longs

Bamboo/Walnut quiver build/help along Updated / leather added!

<< < (8/21) > >>

sleek:
Damn. Perhaps the nodes should have been left to help hold ot together as it dried?

Pat B:
Patrick, soak it in warm water. When it softens, put it back together with a wrap until it dries. Then you should be able to glue the 2 separated pieces and wrap til the glue sets. 

lebhuntfish:
Yeah it kinda sucks. Pat that's definitely an idea. I think I'm going to cut it down the middle then surface the edges. And glue a piece of Walnut between each side. It should be pretty straight forward. Just got to get a good glue line.
Patrick

sleek:
Straight forward..... Dont underestimate how critical getting all 4 cut edges perfectly parallel is. If one is off it will throw them all off. Experience speaking here. A straight line is not enough.

Onebowonder:
Perfect work for a joiner...

OneBow

Navigation

[0] Message Index

[#] Next page

[*] Previous page