Main Discussion Area > HowTo's and Build-a-longs
Bamboo/Walnut quiver build/help along Updated / leather added!
lebhuntfish:
Well I've managed to get some more work done on the quiver. I didn't get a lot of pictures because I kinda got carried away in the process.
But I got the other side glued together and took the overhanging Walnut and sanded it all off on my little drum sander. Then I used my card scraper and cleaned up all the left over sheath on the boo and blended the Walnut and boo together. Then I cut it to the length I wanted, sanded the whole thing down to 400 grit and wiped it with a damp rag then resanded. I used a tack cloth and wiped away all of the dust, then put a couple coats of spray polycrylic on it as an initial finish. I also sprayed the inside really good. Now it's time to start making it pretty. Here is a couple of pictures of where I'm at right now.
Patrick
Pat B:
Looking sweet Patrick. 8)
sleek:
I love it. Absolutely beautiful.
osage outlaw:
That is looking great.
lebhuntfish:
Thanks fellas! I hate to cover it up at all. But some of it will have some wrapping on it.
Patrick
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version