Main Discussion Area > English Warbow

First Nocks

<< < (2/2)

outcaste:
Try using abit of wet 'n' dry paper to finsh off then a bit of oil should be fine.

Alistair

SimonUK:
Thanks guys.

On the subject of oil... is there any truth to the theory that oil reduces the draw weight/performance of a bow?  If it does I'll varnish the bow and oil the nocks.

outcaste:

--- Quote from: SimonUK on February 22, 2008, 09:22:52 pm ---Thanks guys.

On the subject of oil... is there any truth to the theory that oil reduces the draw weight/performance of a bow?  If it does I'll varnish the bow and oil the nocks.

--- End quote ---

Yes I have heard this but don't know what the science is to back this up? If anyone can explain it would be great. I personally like the finish of traditional finishes such as turpintine/boiled linseed, beeswax, animal fats and such like.

Alistair

bobnewboy:
HI Simon,

On the horn pieces I've used, I find the best finish is achieved with using fine sandpaper grades (e.g 320-400), then a polishing mop in a drill with a coarse metal polish such as brasso, solvol autosol or similar.  This can also be done with a cloth in the hand if you have the patience   ;)  I then use a fine coat of varnish, cos I'm not always sure that the horn will be impervious to rain etc., but the final finish is for yourself to choose.  Wax might work well.

Cheerz, Bob

Lost Arra:
I'm also getting ready to do my first horn nocks.

Is it common to cut the string groove thru the horn where the limb wood is exposed?

It seems that would defeat the purpose of placing the horn over the sapwood.

Navigation

[0] Message Index

[*] Previous page