Main Discussion Area > Flintknapping

indirect flaking

(1/2) > >>

lauderw55:
Hey does any of you guys indirect flaking out there. I am in process of getting a ishi stick and am looking for some pointers. Like what can I use to strike the ishi stick with? Any pointers with the whole process. Thank you and have a good day

nclonghunter:
Ishi sticks are used as pressure flakers.

There is a type of reduction that uses an antler attached to a stick and is struck by another antler,stick or rock which is an indirect percussion. I think Marty Reuter has a youtube video on a horizontal stick using indirect percussion. 

Hope this is what you are asking. There are some posts in the ABO Knapping section on indirect also. If you havent tried using antler punches then you may want to give it a try also.

bronco611:
look on youtube for indirrect flintknapping, Jack Crafty has a lot of videos and you can see all of his tools also.

bjrogg:
Jack Crafty has videos using indirect, and showing his tool and materials used and sizes of materials. I tried doing it but wasn't comfortable. My brother uses a 6x6" block to put his foot on sits in chair. Put long handle end of tool pinched between upper and lower leg behind knee. Strike tool fairly close to tip end. I actually am starting to get the hang of it now and it is surprising how much material you can remove using this method. Good luck hope that helps
Bjrogg

lauderw55:
Thanks guys I checked him out on YouTube. He sure makes that look a lot easier than it probably is

Navigation

[0] Message Index

[#] Next page