Main Discussion Area > English Warbow

Miniature Bodkin Points

(1/3) > >>

jaxenro:
Just a quick photo of the 3D file for printing the miniature bodkin points in steel. I set it up to print in blocks of 25 they will need to be cut out and the sockets drilled. Sort of a high tech primitive in a way although seeing the technology that goes into a horn/wood/sinew bow I wouldn't call that primitive either

FilipT:
A fellow engineer! :)

jaxenro:
I ended up having to cut the file down to get them made but here are the first six all ready to put onto arrows. These things came out really tiny, shown on a $20 for scale, and needle sharp

Ian.:
Came out nice

jaxenro:
I like them. I ended up having them done in bronze they wouldn't work in the "steel" they use so the choices were brass, bronze, or silver (which is much more expensive). I suppose silver might be good for hunting vampire bats though  :)

Navigation

[0] Message Index

[#] Next page