Information and Resources > Trading Post
ISO
LEGIONNAIRE:
Hello Fellows I know that many of us have other hobbies so If you know anyone that can make this or if you can make this let me know. Im looking for a 2.5-3 inch in diameter metal ball with a 3/4 inch hole down the middle. I;m looking to build a Maze. Let me know if you anyone can make this. Thank you!
Cesar
Aaron H:
I can get you a precision ball bearing that size, but good luck drilling through it...
Aaron
osage outlaw:
--- Quote from: Aaron H (Falcon) on September 22, 2016, 06:36:10 am ---I can get you a precision ball bearing that size, but good luck drilling through it...
Aaron
--- End quote ---
Could you anneal it before drilling?
Aaron H:
Yes Clint, and that would be the way to go. BUT, I imagine you would still need a mill and a carbide bit to get through it, these things are hardened to the max.
Aaron H:
Looks like 2" is all I have at the moment
Navigation
[0] Message Index
[#] Next page
Go to full version