Author Topic: Ash in the works (FD added)  (Read 11234 times)

0 Members and 1 Guest are viewing this topic.

Offline loon

  • Member
  • Posts: 1,307
Re: Ash in the works
« Reply #15 on: October 14, 2016, 04:36:47 pm »
Got the string served up.  I picked this string up at The Classic.  Its turning out to be a great product.  Not quite the piano wire fast flight is but still performs real well with some forgiveness to it.  I didn't make a note about the maker...anybody recognize it?

Did you mix it with dacron for the darker stuff on the actual string or what? Strange that it's not a piano wire like fast-flight. I imagine it's among the 'best', lowest stretch stuff there is. And mighty expensive..

Nice bow!

Nice color choices on the string, too..
« Last Edit: October 14, 2016, 04:42:01 pm by loon »

Offline DC

  • Member
  • Posts: 10,396
Re: Ash in the works
« Reply #16 on: October 14, 2016, 06:52:51 pm »
It's only expensive if you look at the price of a roll. Per bow it's something like $2 a string.

Offline loon

  • Member
  • Posts: 1,307
Re: Ash in the works
« Reply #17 on: October 14, 2016, 08:07:06 pm »
My 1/8# of D-10 has almost ran out, and I've made less than a dozen strings... ($28+shipping)
1/4# of BCY-X is $58, 1/8" is $33.25... that'd be around 3-4$ a string? Welp
wonder if bcy-x is any better than d-10 or d-97 for trad/primitive

Offline bubby

  • Member
  • Posts: 11,054
Re: Ash in the works
« Reply #18 on: October 15, 2016, 01:21:32 am »
You can get d-97 on ebay for $16 for that size spool. How many strands are you using i usually go 8 or 10 strands for up to 60# bow
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline loon

  • Member
  • Posts: 1,307
Re: Ash in the works
« Reply #19 on: October 15, 2016, 10:11:45 am »
I went with 12 strands. yeah, I should go with ebay next..

Offline Parnell

  • Member
  • Posts: 5,551
Re: Ash in the works
« Reply #20 on: October 26, 2016, 10:32:18 am »
Getting close to finished up.  A few more scrapes on the top limb, maybe.  I found an old fur shall(sp?) at a garage sale and cut it up.  Makes pretty good silencers.  Not sure what it is, though.

Couple teaser pictures.  FD should be in the next day or two.
1’—>1’

Offline Aaron H

  • Member
  • Posts: 3,437
Re: Ash in the works
« Reply #21 on: October 26, 2016, 12:04:09 pm »
Now that's slick.  8)

Offline Eric Garza

  • Member
  • Posts: 587
Re: Ash in the works
« Reply #22 on: October 26, 2016, 12:10:06 pm »
That's a very dark heat treatment. I try hard to avoid scorching the wood like that.

Offline Parnell

  • Member
  • Posts: 5,551
Re: Ash in the works
« Reply #23 on: October 26, 2016, 12:39:18 pm »
I've had better results with "whitewood" giving it lots of heat for an extended time to get it black but without starting an ember, which to me is scorching it.  Then its ruined.  For sometime I'd get the wood toasted brown but that was just superficial and whitewood still took too much set.  Working with Mullet I learned to give it much longer slower deeper treatment.  This bow is shot in and still holding some reflex.  And, I like the way it looks!
1’—>1’

Offline paco664

  • Member
  • Posts: 307
  • ok,ok.. i might have done it...
Re: Ash in the works
« Reply #24 on: October 26, 2016, 02:13:05 pm »
dayummmmmmmm steve... i like it....

i also notice the total LACK OF PHOTOS BEING TEXTED TO ME!!!!   >:( >:( >:(  ;D
I'm too drunk to taste this chicken"~Col.H.Sanders

Offline GB

  • Member
  • Posts: 519
Re: Ash in the works
« Reply #25 on: October 26, 2016, 05:34:10 pm »
Looking good!
I have a couple small green ash trees that sprouted between my house and the driveway a few years ago.  Eventually they'll have to come down.  Gonna bookmark this for future reference, esp. the heat treating.
Yeah, I remember when we had a President who didn't wear a tinfoil hat.

Offline osage outlaw

  • Member
  • Posts: 11,952
Re: Ash in the works
« Reply #26 on: October 26, 2016, 05:41:35 pm »
That's looking really good Parnell. 
I started out with nothin' and I still got most of it left

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,509
Re: Ash in the works
« Reply #27 on: October 26, 2016, 05:43:44 pm »
She looks nice Steve. I've only made a few elm bows and was impressed with it, especially toasting the belly. My elm bows were short recurves. Let me know how a long, straight bow works out.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Parnell

  • Member
  • Posts: 5,551
Re: Ash in the works (FD added)
« Reply #28 on: October 26, 2016, 08:16:06 pm »
The lighting decided to cooperate tonight.
1’—>1’

Offline osage outlaw

  • Member
  • Posts: 11,952
Re: Ash in the works (FD added)
« Reply #29 on: October 26, 2016, 08:32:38 pm »
Good looking bend.  The color of the sky is beautiful.
I started out with nothin' and I still got most of it left