Main Discussion Area > Muzzleloaders

.54 Great Plains Rifle

<< < (9/9)

Eric Krewson:
Nope, no mixing, used separately at different times.

ksnow:
Second what Mullet suggested, I stick the end of a strip of ticking in my mouth while I measure and pour my powder, then lay a ball on the wet end of the strip, push into the muzzle and cut off with a knife.  Works well, can shoot a long time, unless it gets to 20 or so degrees, then things start freezing.  That's when I switch to a grease lube.

Kyle

Navigation

[0] Message Index

[*] Previous page