Main Discussion Area > Arrows
feather cutter
mullet:
Good idea.
El Destructo:
Why.............Thanks Eddie!!!!!!!!!!!
;D ;D ;D ;D ;D :o ;D ;D ;D ;D ;D
Otoe Bow:
That's a really neat idea, but how does the bottom wire keep from burning the feather off the shaft? :( :(
Otoe
wvfknapper:
Yank,, good idea,,, I had one I made years ago and lost track of it,,, I used a power box for a electric train (don't remember what they are called,, it's like a transformer/reducer thingy ) they have 2 studs with nuts and you just take a heating element out of an old electric heater and wire the ends to the studs and turn it on, glows bright red ;D you can make a spinner out of wood with a notch in the end to accept the knock..............If I can find it I will get a pic.
Way cheaper than a factory feather burner ;)
wvflintknapper
El Destructo:
--- Quote from: Otoe Bow on March 16, 2008, 02:04:08 am ---That's a really neat idea, but how does the bottom wire keep from burning the feather off the shaft? :( :(
Otoe
--- End quote ---
There is about 1 inch of clearance between the Cut feather and the lower Wire....works really good....and you can just replace the Wire with a different shape cutter....in about 30 seconds too....I have them made for about 5 different cuts........
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version