Main Discussion Area > Arrows

Best spine tester for the money.

<< < (3/3)

gfugal:
I built my own. I started a topic about it a while ago. It's not for most people since it requires doing your own calculations, but if you can get through my ramblings you should be able to figure out and just put it into excel to calculate it for you. It's very accurate and cheap. No calipers required, and you can use pretty much anything for a weight. http://www.primitivearcher.com/smf/index.php/topic,58825.0.html 

BowEd:
Making your own worked great for me.Whatever method you use.Testing it against other spiners will tell ya if it's good.
It reveals a lot that's for sure especially if buying split timber shafts from different companies.I've found some companies hand pick and test each one before they send them.Some don't.
Nice to hit what you aim at too.

loon:

--- Quote from: gfugal on April 29, 2017, 07:43:04 pm ---I built my own. I started a topic about it a while ago. It's not for most people since it requires doing your own calculations, but if you can get through my ramblings you should be able to figure out and just put it into excel to calculate it for you. It's very accurate and cheap. No calipers required, and you can use pretty much anything for a weight. http://www.primitivearcher.com/smf/index.php/topic,58825.0.html

--- End quote ---
I think it's easier to just use a caliper than to make that dial thing, but it's very cool

Navigation

[0] Message Index

[*] Previous page