Main Discussion Area > Horn Bows

Bow bracing peg board

<< < (2/2)

BowEd:
This tractor shed is rather small really for a tractor shed.25' by 30'.I put some removable 2"by4" extensions on the ends of the peg board with inserted dowels getting another 7" of width in case of doing longer bows.Total width of possibly using 61" now.Just doodling around I guess.

BowEd:
Updated version..I had to put a 2' by 4" across the backside of the 3/4" plywood because the plywood was warped a bit so I drilled some 1/2" holes through the 2" by 4".Drilled and mounted 2 half inch dowels on the door stringer for it to slip onto.Solid as a rock.Right at chest level.

Navigation

[0] Message Index

[*] Previous page