Main Discussion Area > Flintknapping

Getting ready to put together a kiln

<< < (5/5)

caveman2533:
Be careful to not let the thermocouple touch the rock. It will cause the temp to rise  beyond what the rock is rising and will cause overheating.

Huntrick64:
Good point caveman, and that makes sense.  I protect that probe like it was my own personal probe.  No banging it on the rocks, no smashing it between rocks, keep it clean, and pretty much, nothing touches it, ever.
 :)

iowabow:

--- Quote from: caveman2533 on July 19, 2017, 02:12:43 pm ---Be careful to not let the thermocouple touch the rock. It will cause the temp to rise  beyond what the rock is rising and will cause overheating.

--- End quote ---
for correct heating keep it a couple inches from any mass

Navigation

[0] Message Index

[*] Previous page