Main Discussion Area > ABO

Wear technology

(1/6) > >>

iowabow:
I started using a little different technique. This idea developed from four combining ideas. It is a very simple idea that I will try to discribe below.  <
1. My laziness
2. A conversation with James Parker
3. A documentary from modern marvels
4. Tool making.
Basically I found a better way to be lazy. I never sharpen a flint knapping tool except the ulna bone just before notching. James Parker's tool kit has flakers that are more pointed than others and provide a finer handling and smaller surface contact. This is something not in my tool kit. The reason why was two fold laziness and process. My laziness helped me develope a process that provide a great cutting edge and really fast production techinque.  I didn't want shapening and tool prep to be an element of the process. Well this turned out the be a really good way to make about 600 points. This does have a couple real drawbacks. The phase of preform to the halfway point is a wall that as an ABO knapper is hard to climb. I developed ways to work around this but an out of mass process means I can combine the two forms.
My old process was an into mass process. This needed a heavy tool and above center line orintation. A very sharp surface was the result and allowed the tool to never need resharpening. So the tip on the ishi was very rounded.
 
1. So the change was influenced by watching James cut a stone in half with an out of mass techniques (highly simplified statement). In and out are exchanged depending on his need. My process was "into" primarily due to a developed technique. I really liked his flat flakes and symmetrical form with cool patterns. During the classic I kept working a peice and talking to James about this process.
2. When I knap I just don't  want to stop and sharpen a tool its that simple. When there is a way around I'm just not going to. But to make the next leap it was going to be important to work something out.
3.
Watching Modern Marvels "Worlds Sharpest" it showed how some wear created a sharper tool (the point is that a tool is made based on a wear process). But in my case a duller tool. The dull tool was the tool I spent time making in the first place with the old technique. So if I use new antler tips that are sharp and very hard for limited work torward the end with an out of mass technique I can accomplish two things. First, I can use flat flakes (less force is necessary due to surface contact) to super thin my 100 grain points and make an into mass tool (4, rounded tip tool) that is reminiscent of the old technique ishi stick tool.
This is just a simple adjustment and a basic concept addition that allowed me to drop this point from 170 grains to 100 grains with very little loss of length and width.

bowmo:
I actually never sharpen anything but my punches and my one fine pointed antler tine flaker that I use for micro flaking edges sometimes. Other than that the maintenance I'm constantly doing is cleaning the tip up from chipping the antler or cleaning flakes that drove themselve into it. I've tried to strike a balance, a narrow enough tip to not have tons of contact surface and force you to use a corner which I don't like for most Ishi stick work but strong enough not to chip constantly. Really I think its my super aggressive force I use while popping of pressure flake passes that cause the problem tho. It doesn't bother me really  :KN

Stringman:
A few of us have been chewing on Parker's "into mass/out of mass" statements for the last couple years. I am trying to reconcile his theory with my reality and believe I'm sneaking up on something. I don't have any documentation yet, but I do feel like the concept has worked into my strategy a little and I'm profiting somewhat by the change. Obviously, most of JP's work is bone and stone so not everything he does translates into my copper heavy approach, but I take what I can and use it as it fits. 

Ed Brooks:
I may burnish the tip of my antler, on a smooth hard flat surface of a rock, but not sharpen them at all. Ed

iowabow:
This is really cool to have a group working on the concepts and it should expand. For me it made a huge difference and it was fun to follow the change with the grain scale and watch the point thin out like as if I had a copper tool in my hand although the memory of that has just about faded. It is a small change but a big difference.
Btw the flake patterns are crazy before you push the deltas off.

Navigation

[0] Message Index

[#] Next page